edsanders.com - AMSOIL Engine Flush

E-Mail: edsanders@edsanders.com

Cleans the crankcase, cylinder walls, pistons and rings for maximum efficiency, protection and performance. Prepares engines for installation of AMSOIL Synthetic Motor Oil. Flushing requires one can per vehicle.

I highly recommend using Amsoil Engine Flush before using Amsoil (or any synthetic). Amsoil ans many synthetic oils are highly detergent and will clean the sludge and varnish made by petroleum oils from the interior of engines.

This crud, if not removed can clog oil ports ands oil return holes. Amsoil Engine Flush is well worth using!

How to use Amsoil Engine Flush... You might like to print this out.

Do this outside or using a pipe to the exterior to remove exhaust fumes.
Leave the old petroleum oil in your engine.
Remove the old oil filter.
Install a new Amsoil Oil FIlter.
Pour in a can of Amsoil Engine Flush.
Start the engine and idle it for 20 minutes to 1/2 hour.
DO NOT drive the car!
Shut off the engine after the idle period.
Drain the oil.
Remove the oil filter and install a new Amsoil Oil Filter.
Replace the drain plug!
Pour in Amsoil Engine oil.
For more info click to: Converting an engine to Amsoil

Link to Amsoil Section of edsanders.com

Amsoil has online ordering so you're just a click away from ordering. You'll want to click here and see the other info from me as well!

If you're interested in the opportunity AMSOIL makes available to us all, or in getting Amsoil products at wholesale please Click here and scroll down there to read the other info from me and contact me, independent AMSOIL Direct Jobber, edsanders@edsanders.com I'll need your snail mail address to send you a form.

Ordering Amsoil Products:

To order AMSOIL Products, click on the link below:

AMSOIL Online Store

Or

Call 1-800-956-5695

7 a.m. to 5 p.m. Central USA Time Monday - Friday
Customer Number: 23310

(Be sure to write this down)